382 Hardware InstallationJumper SettingsIf you encounter the following,a) CMOS data becomes corrupted.b) You forgot the supervisor or user password.c) You are unable to boot-up the computer system because theprocessor’s clock was incorrectly set in the BIOS.you can reconfigure the system with the default values stored in theROM BIOS.To load the default values stored in the ROM BIOS, please followthe steps below.1. Power-off the system and unplug the power cord.2. Set JP2 pins 2 and 3 to On. Wait for a few seconds and set JP2back to its default setting, pins 1 and 2 On.3. Now plug the power cord and power-on the system.If your reason for clearing the CMOS data is due to incorrectsetting of the processor’s clock in the BIOS, please proceed tostep 4.Clear CMOS DataClearing CMOS Data using JP2U322-3 On:Clear CMOS Data1-2 On: Normal(default)XJP2 31 2 31 2
