Nvidia BlueField BF1500 Hardware Installation
Also see for BlueField BF1500: User guide
       |
Hardware InstallationInstallation and initialization of the BlueField BF1500 Controller Card require attention to the mechanical attributes, power specification, and precautions forelectronic equipment.Safety WarningsPlease observe all safety warnings to avoid injury and prevent damage to system components. Note that not all warnings are relevant to all models.Note that not all warnings are relevant to all models.General Installation InstructionsRead all installation instructions before connecting the equipment to the power source.Jewelry Removal WarningBefore you install or remove equipment that is connected to power lines, remove jewelry such as bracelets, necklaces, rings, watches, andso on. Metal objects heat up when connected to power and ground and can meltdown, causing serious burns and/or welding the metalobject to the terminals.Over-temperatureThis equipment should not be operated in an area with an ambient temperature exceed-ing the maximum recommended: 55°C (131°F). Anairflow of 200LFM at this maximum ambient temperature is required for HCA cards and NICs. To guarantee proper airflow, allow at least8cm (3 inches) of clearance around the ventila-tion openings.During Lightning - Electrical HazardDuring periods of lightning activity, do not work on the equipment or connect or dis-connect cables.Copper Cable Connecting/DisconnectingSome copper cables are heavy and not flexible, as such, they should be carefully attached to or detached from the connectors. Refer to thecable manufacturer for spe-cial warnings and instructions.Equipment InstallationThis equipment should be installed, replaced, or serviced only by trained and qualified personnel.Equipment DisposalThe disposal of this equipment should be in accordance to all national laws and regula-tions.Local and National Electrical CodesThis equipment should be installed in compliance with local and national electrical codes.Hazardous Radiation ExposureCaution – Use of controls or adjustment or performance of procedures other than those specified herein may result in hazardousradiation exposure.For products with optical ports.CLASS 1 LASER PRODUCT and reference to the most recent laser standards:IEC 60 825-1:1993 + A1:1997 + A2:2001 and EN 60825-1:1994+A1:1996+ A2:20Installation Procedure OverviewThe installation procedure of BlueField BF1500 Controller Card involves the following steps:Step Procedure Direct Link1 Check the system’s hardware and software requirements. Refer to System Requirements2 Pay attention to the airflow consideration within the host system Refer to Airflow Requirements3 Follow the safety precautions Refer to Safety Precautions4 Unpack the package Refer to Pre-Installation ChecklistSafety warnings are provided here in the English language. For safety warnings in other languages, refer to the BF1500 Controller Carddocument available on .Installation Safety Instructions mellanox.com |
Related manuals for Nvidia BlueField BF1500
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine