- -nVIDIA N61P/N61S/N61V User's /ManualLoad Fail-Safe Defaults (Y/N)? N4.5.11 Load Fail-Safe DefaultsThis option opens a dialog box that lets you install fail-safe defaults for all appropriate itemsin the Setup Utility: Press and the to install the defaults. Press andthen to not install the defaults. The fail-safe defaults place no great demand onthe system and are generally stable. If your system is not functioning correctly, try installingthe fail-safe defaults as a first step in getting your system working properly again. If youonly want to install fail-safe defaults for a specific option, select and display that option,and then press .4.5.12 Load Optimized DefaultsThis option opens a dialog box that let you install optimized defaults for all appropriateitems in the Setup Utility. Press and then to install the defaults. Press and then to not install the defaults. The optimized defaults place demand on thesystem that may be greater than the performance level of the components, such as theCPU and the memory. You can cause fatal errors or instability if you install the optimizeddefaults when your hardware does not support them. If you only want to install setupdefaults for a specific option, select and display that option, and then press .Load Optimized Defaults (Y/N)? N4.5.13 Set Supervisor/User PasswordWhen this function is selected, the following message appears at the center of the screento assist you in creating a password.Type the password, up to eight characters, and press . The password typed nowwill clear any previously entered password from CMOS memory. You will be asked toconfirm the password. Type the password again and press .Enter Password:Confirm Password:You may also press to abort the selection.Note: Don’t forget your password. If you forget the password, you will have toopen the computer case and clear all information in the CMOS before you can startup the system. But by doing this, you will have to reset all previously set options.
