nForce 680i SLI/nForce 680i LT SLICopyrightAll rights are reserved. No part of this publication may be reproduced, transmitted, transcribed,stored in a retrieval system or translated into any language or computer language, in any formor by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise,without the prior written permission of the company. Brands and product names aretrademarks or registered trademarks of their respective companies.The vendor makes no representations or warranties with respect to the contents herein andespecially disclaim any implied warranties of merchantability or fitness for any purpose.Further the vendor reserves the right to revise this publication and to make changes to thecontents herein without obligation to notify any party beforehand. Duplication of thispublication, in part or in whole, is not allowed without first obtaining the vendor’s approval inwriting.TrademarkAll the trademarks or brands in this document are registered by their respective owner.DisclaimerWe make no warranty of any kind with regard to the content of this user’s manual. The contentis subject to change without notice and we will not be responsible for any mistakes found inthis user’s manual. All the brand and product names are trademarks of their respectivecompanies.FCC Compliance StatementThis equipment has been tested and found to comply with the limits of a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. Operation of thisequipment in a residential area is likely to cause harmful interference in which case the userwill be required to correct the interference at his own expense. However, there is no guaranteethat interference will not occur in a particular installation.CE MarkThe device is in accordance with 89/336 ECC-ENC Directive.Ver: EG101