14TURN ON/OFF THE CAMERA POWER(Fig.4)Press the power button once to turn on the camera'spower, the lens will extend forward and stop at wideposition. It is ready for shooting. Press the powerbutton once again to turn off the camera's power,the lens will directly retract back to the off positionno matter what position is previously.AUTO POWER OFF SYSTEMIf the camera is at power on and non-operated formore than 5 minutes, the system will turn off thecamera power and retract the lens to the "off"position. Press power button once again to turn onthe camera's power.LOADING THE FILM(Fig.5)The camera uses standard 35 mm 135 size filmmagazines with DX coding. The film speed (ISO100~400) is set automatically when the film isloaded.1. Push the back cover latch upward toward directionof the arrow to open the back cover.Be careful not to touch the lens inside the camera.Check to see whether the camera is loaded witha film or not by looking through the film checkwindow.2. Place a new roll of film in the film chamber. Drawout the tip of the film, holding the magazine inplace.3. Draw out the film tip as far as the FILM TIP markinside the camera.