OAKWORKS 300 Series User Manual

Also see for 300 Series: User manual

Contents

OAKWORKS 300 Series User Manual Manual pdf 10 page image

DIReCTIOnS fOR USeThe chair can be rotated with a patient in it. Locate the black push buttons at the top of the back rest section.Press in and hold either one of the buttons to disengage the base locking mechanism. While holding in the pushbutton, rotate the chair to the desired position up to 240°.7CAUTIOnSWIvel bASe USeWhen rotating the chair, make sure there is nothing around the chair that can impede therotational motion (like stools, cabinets, etc)rotate upto 240º1. Fully lower the poweredfoot rest to allow access tothe stirrup.3. Fold out to fully openposition.2. Grasp Stirrup handle &pull out firmly while liftingslightly. Pull fully out.4. To rotate stirrup to thedesired angle, lift slightlyand move to the desiredposition. There are 3detent positions. Stop lift-ing and move slightly leftor right for the nearestdetent position.5. To reduce stirruplength, lift the handleslightly and push intodesired position. Stirrupwill automatically lockinto nearest detent posi-tion.To store stirrups, lift slightly, rotate towards the middle of the chair andfold the foot rest down. Then lift slightly and push into the storage position.ReTRACTAble fOOT ReSTS (STIRRUP) USeCAUTIOn Pinch Point - Keep fingers away from pinch point.