OHAUS AX224N Instruction Manual

OHAUS AX224N Instruction Manual Manual pdf 33 page image

ADVENTURER BALANCES EN-315.2.6 Linearity CalibrationLinearity calibration uses three calibration points, one at zero load and the others at specified loads.With no load on the scale, press Linearity Calibration to begin the process.The balance captures the zero point, and then prompts for the next weight.Continue to follow the instructions on the display until the calibration is completed.To cancel at any time, press Cancel.5.2.7 Calibration TestUse Calibration Test to compare a known calibration weight against the stored span calibration data.With no load on the scale, press Cal Test to begin the process.The balance captures the zero point, then prompts for the span value.The display shows status, followed by the difference between the current calibration weight and thestored calibration data.5.3 Balance SetupEnter this sub-menu to customize Balance functionality.5.3.1 Balance Set-up sub-menuLanguage User Settings Filter Level Auto ZeroTrackingAuto Tare Graduations Date & Time Approved ModeFactory default settings are shown below in bold.5.3.2 LanguageSet the language displayed for menus and displayedmessages.EnglishGermanFrenchSpanishItalianRussianChineseJapaneseKorean