OHAUS CW-11 Instruction Manual

Also see for CW-11: Instruction manual

OHAUS CW-11 Instruction Manual Manual pdf 38 page image

EN-32 CW-11 Indicator4.13 Printing DataPrinting data to an external computer or printer requires that the communications parameters in the Print menu,be set first. Refer to paragraph 2.8.6 Print Menu for proper set up.To print data, press PRINT/UNITS button with a short press. The display acknowledges by momentarilyblinking off.NOTE: If you hold this button down too long, the display will advance to another measuring unit.4.12 RS232 CommandsAll communication is accomplished using standard ASCII format. Characters shown in the following table areacknowledged by the Indicator. Invalid command response "ES" error indicates the Indicator has not recog-nized the command. Commands sent to the Indicator must be terminated with a carriage return (CR) or car-riage return-line feed (CRLF). Data output by the Indicator is always terminated with a carriage return - line feed(CRLF).4.12.1 Output FormatsCommandCharacter Description????? Print current mode: kg, g, lb., oz.PPPPP Same as pressing PRINT button.TTTTT Same as pressing TARE button.ZZZZZ Same as pressing ZERO button.x Sx Sx Sx Sx S Print Stable only. Where x=0 Off, and x=1 OnA SA SA SA SA S Automatically send data when stable after motion.xxxxS Send at interval. Where xxxx=1 to 3600 seconds.CS Send as fast as possible (continuous print)M Increment to next enabled unitTo turn auto printing, interval printing or continuous printing off, send 1S or 0S to reset normal printingmode.RS232 USER COMMAND TABLERS232 USER COMMAND TABLERS232 USER COMMAND TABLERS232 USER COMMAND TABLERS232 USER COMMAND TABLE4. OPERATION (Cont.)Data output can be initiated in one of two ways:1. By pressing the PRINT/Units button, or2. Sending a print command (“P”) from a computer.Output FormatsThe output format is as follows:Weight* Spaces Unit Stable Legend CR LFLength: 9 1 3 1 1 1 1blank=stable G,N,T"?"= not stable* Displayed weight sent right justified with lead zero blanking. Nine characters (fixed) include:decimal point (1), weight (7 max), polarity (1) : blank if positive, floating negative (1)