OHAUS Defender 2000 Series Instruction Manual

Also see for Defender T24PE: Instruction manual User guide

EN-232000 Series Indicators3.8.5 HandshakeSet the flow control method.NONE = no handshaking.ON-OFF = XON/XOFF software handshaking.3.8.7 Auto PrintSet the automatic printing functionality.OFF = disabled.ON.StAb = printing occurs each time the stability criteria are met.INtEr = printing occurs at the defined interval.CONt = printing occurs continuosly.When INtEr is selected, set the Print Interval.1 to 3600 (seconds)3.8.6 Stable OnlySet the print critera.OFF = values are printed immediately.ON = values are only printed when the stability criteria are met.3.8.4 Stop BitSet the number of stop bits.1 = 1 stop bit.2 = 2 stop bits.3.8.8 ContentSelect the additional content of the printout.RESULT OFF = Result is not printed.ON = Result weight is printed.NUM = Numeric portion of the displayed reading is printed.GROSS OFF = Gross weight is not printed.ON = Gross weight is printed.NET OFF = Net weight is not printed.ON = Net weight is printed.TARE OFF = Tare weight is not printed.ON = Tare weight is printed.UNIT OFF = Unit is not printed.ON = Unit weight is printed.MODE OFF = Mode is not printed.ON = Mode is printed.INFO OFF = Info is not printed.ON = Info is printed.mModerESULtINFO