OHAUS Frontier FC5718 Instruction Manual

Also see for Frontier FC5714: User guide User guide Service manual Instruction manual Instruction manual

Contents

OHAUS Frontier FC5718 Instruction Manual Manual pdf 9 page image

FrontierTM Centrifuge FC5714/FC5718/FC5718R/FC5816/FC5816R EN-2Warning and information signs on the surface of centrifugeFour carriers must be used at all times on four place swing out rotors or damage willoccur to the centrifuge. Such damage will not be covered under the product warranty.Attention! Check the fastening of the rotor nut before each run.Take off mains plug before opening the housing or the emergency release.Direction of rotation – clockwise rotation for the rotor driveReference for loading rotors1.4 Safety Precautions1.4.1 UserOHAUS centrifuges are intended exclusively for indoor use and for use by qualified personnel. This device mayonly be operated by trained specialist staff. They must have carefully read the operating manual and be familiarwith the functions of the device.1.4.2 Rotor and accessoriesOnly OHAUS original rotors and accessories shall be used. Any other use or intended use is considered improper.OHAUS is not liable for damage resulting from improper use.CAUTION:Read all safety warnings before installing, making connections, or servicing this equipment. Failure tocomply with these warnings could result in personal injury and/or propertydamage. Retain instructions for future reference.1.4.3 Measures for your protectionWARNING: Never work in an environment subject to explosion hazards! The housing of the instrument isnot gas tight. (Explosion hazard due to spark formation, corrosion caused by the ingress of gases)WARNING: When using chemicals and solvents, comply with the instructions of the producer and thegeneral lab safety rules.WARNING: The centrifuge is not sealed. Use suitable protection measures when using the centrifuge forinfectious and pathogenic samples. Follow appropriate safety precautions when handling these samples.1.4.4 Exclude the following environmental influences Powerful vibrations Direct sunlight Atmospheric humidity greater than 80% Corrosive gases present Temperatures below 2 °C and above 35 °C Powerful electric or magnetic fields: