OHAUS SJX323 Instruction Manual

Also see for SJX1502: Quick start guide

Contents

SCOUTTM SJX SERIES BALANCES EN-93.10 Hold ModeThere are two modes for the display hold:- Peak Hold: allows the user to capture and store the highest stable weight value (>=5d).- Display Hold (default): allows the user to capture and store the first stable weight value (>=5d).StartIf no weight value is held on the display, press Function key to begin. The [rEAdY] (Ready) willbe displayed until a weight is added on the pan.When the stable value is being held on the display, the Hold icon (H) will blink and the displayedweight will not change.ResetIf the pan is empty and a weight value was held on the display, a single short press of theFunction key will clear the held value and show the new weight on the pan.1. Press and hold Mode until [HoLd] is displayed.2. If required, place an empty container on the pan and press Tare. Zero value will thendisplay.3. Press Function key to begin. The [rEAdY] (Ready) will be displayed.4. Place samples to be weighed on the pan.5. The stable value will be held on the display, the Hold icon (H) will blink.4. MENU SETTINGSThe User Menu allows the customizing of balance settings.Note: Additional Sub-Menus may be available if Interface Options are installed. See InterfaceUser Manual for the additional setting information.4.1 Menu NavigationUser Menu:Sub-Menus C.a.l S.E.t.U.P M.o.d.E U.n.i.t** E.n.dUser Menu Items: In.CAL*A.CAL*On/OffCAL.Adj*-100..0..100SpanLinResetYes/NoFilterLow/Med/HighAZT0.5/1/3/OffStableRange0.5/1/2//5BacklightOff/On/AutoAuto TareOff/On/On-accAuto OffOff/1/5/10ResetYes/NoWeighingOn/OffCountingOn/OffPercentOn/OffCheckOn/OffTotalizeOn/OffDensityOn/OffHoldDisp/Peak/OffResetgkgctozoztdwtlbgrnhktsgttwtttola/ticalEnd End End EndNote:* These sub-menus are not available in SJX/E models.** Available Units may vary by local regulations.No/BackLong press -Enter menuShort press -AcceptShort press –Go Next/Prev.menuYesExit Short press –Exit menu