OHAUS ST300 Service Manual

Also see for ST300: Instruction manual Instruction manual

Contents

CHAPTER 3 RESET TO FACTORY SETTINGSStarter Series Portable Meter Service Manual 3-1 Ohaus Corporation www.ohaus.com3.1 Recover factory settingsFor ST300, ST300C and ST300D proceed as below: When the meter is off, press and hold button-Read & button-Cal & button-Exitsimultaneously for 3 seconds, the screen displays and blinks, means “Reset”. Thenwe have 2 choice: Press button-Read to reset factory settings (MTC, slope and offset, etc.).Or press button-Exit to quit the setting and turn off the meter.For ST400D proceed as below: Switch ON the meter. Press button- and button- simultaneously to enter the Reset Factory Settingscreen. Meter screen will show as below where respective information is back to Factory Default.Figure 3-1. ST400D Factory Default Screen.