OHAUS STARTER 300C Instruction Manual

Also see for STARTER 300C: Instruction manual Instruction manual

Contents

EN-2 STARTER 300C Portable Conductivity Meter1.2 Safety PrecautionsCAUTION: Read all safety warnings before installing, making connections, or servicing thisequipment. Failure to comply with these warnings could result in personal injury and/or propertydamage. Retain all instructions for future reference. Use the equipment only in dry locations. Dry off any liquid spills immediately. The instrument is not watertight. When using chemicals and solvents, comply with the instructions of the chemical producerand the general lab safety rules. Use only approved accessories and peripherals. Operate the equipment only under ambient conditions specified in these instructions. Do not operate the equipment in hazardous or unstable environments. Service should only be performed by authorized personnel.1.3 Display and controlsDisplays1Endpoint stability icon ; Auto endpoint icon2 Measurement icon - ; measurement or calibration is running3 Calibration icon - ; calibration in progress4 Setup icon - ; instrument is in the setup mode5 Battery status icon shows the condition of the batteries - fully charged, half-charged or fullydischarged6 TDS factor in the setup mode7 Conductivity / TDS / Cell Constant8 Standard / Memory number / Error index9 Temperature during measurement or reference temperature in setup mode1 2 3 4 568 97