OHAUS STX123 Instruction Manual
                                                                                                                                                                                                                                                | |
Contents
| 
SCOUT®SERIES BALANCES - STX EN-17Once the necessary weights have beendetermined, the density of the sample isdisplayed in g/cm3 (along with the weightin air, weight in water) on the Applicationscreen.Press Start to reset all the weight values and restart the process.The balance can also be used to measure the Density of a Buoyant Material Using Water.Follow the same procedure as Solid Material above, except in Density Determination step 2,push the sample down (requires special tool, not supplied) into the liquid until it is fullysubmerged.4.5.2 Measuring the Density of a Solid Using an Auxiliary LiquidTo enable this feature, enter the Item Settings screen and select the following: Density Type: Solid Auxiliary Liquid: Other Porous Material: OffConfirm the default values displayed (Liquid Density, etc) are correct.Begin the Density determination process by pressing Start and following the screeninstructions.4.5.3 Measuring the Density of a liquid using a Calibrated Sinker (notsupplied)Enable this feature, enter the Density Item Settings screen and select the following; Density Type: LiquidNote: when the Density Type is set to Liquid, theLiquid type and Porous material selections aredisabled. |
Related manuals for OHAUS Scout Series Balances - STX
manualsdatabase
Your AI-powered manual search engine