OHAUS Valor 5000 Series Service Manual

Also see for valor 5000 series: Instruction manual Instruction manual

Contents

CHAPTER 1 GETTING STARTED1.5.4 Power ONWith power applied, press ON/ZERO/Off. Allow 20 minutes warm-up time. The scale shouldbe calibrated before use. (See Appendix A.)1.5.4 Power OFFWith the scale on, press and hold the ON/ZERO Off button until OFF is displayed.1.5.5 Menu SetupProgrammable features of the Valor 5000 scales are contained in menus which are accessed bypressing TARGET/Menu on the Display Panel. The menu structure consists of three levels:Main, Sub-menu, and Menu item. The Main menu contains the Sub-menus and each Sub-menucontains several Menu items. Each Menu item contains two or more settings.Use the four buttons marked with Yes, No, Back and Exit to navigate through the menus.(See Figure 1-4.) For more detail on using the menus, see the Instruction Manual.– Yes Enters the displayed sub-menu or menu item and accepts the displayed setting.– No Skips to the next sub-menu or menu item and changes the displayed setting.– Back Goes back to the previous sub-menu or menu item.– Exit Immediately exits the Menu mode.Figure 1-4. Valor 5000 Menu StructureValor™ 5000 Series Service Manual 1-7 Ohaus Corporation www.ohaus.com