OKIDATA ML320 User Manual
Also see for ML320 Turbo: Quick guideInstructionsService manualService manualService manual
                                                            | |
Contents
| 
Problem:Nothing happens when I turn on the printer.Solution:Check the power cord connection to the outlet. If you areusing a power strip, make sure it is turned on, and that thefuse has not blown nor the circuit breaker tripped.Problem:The printer does not print when the computer sends data.Solutions:1. Is the SEL light on? If not, press the SEL key.2. Check that the interface cable is securely connected toboth the printer and the computer.3. If you have the optional serial interface board installed,check to be sure that it is firmly seated in the printer.Problem:I'm getting strange symbols, incorrect fonts, etc., when I tryto print a document.Solutions:1. Check to be sure that the printer driver you have selectedin your software matches the printer emulation. (PressSHIFT and SEL keys, then press GROUP key: this willprint a line showing the emulation you have selected.)2. If you have embedded any printer commands in yoursoftware, check to be sure that you entered them cor-rectly.Problem:Ink smears on the paper when I print on narrow forms.Solution:This may be caused by excessive printhead travel from thecentering position. Enter the Menu and set the CenteringPosition to MODE 1 (see Menu Mode in Section 3). Forwide-carriage Model ML321T, if MODE 1 doesn't work,try setting the Centering Position to MODE 2.TroubleshootingE-31Section 4: |
Related manuals for OKIDATA ML320 Turbo
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine