OKIDATA OKIPAGE 20 User Manual
Also see for OKIPAGE 20: Service guide
                                                                                        | |
Contents
| 
Chapter 3: The Printer Menus E–21PAGE LAYOUT1 (continued)TOF POSITION0.0 INCHRange 0.0 to 1.0 INCHNotes: Sets Top of Form in 0.1-inch incre-ments. This determines the print startposition relative to the top of the paper.LEFT MARGIN0.0 INCHRange 0.0 to 1.0 INCHNotes: Shifts the left margin further to theright.Using the Level-2 MenuThe Level-2 menu includes selections that arerarely changed once they are set. To access theLevel-2 menu:1. Press ON-LINE to place the printer off-line.2. Press and hold MENU 1/Menu 2 until you seePRINT MODE on the display. Once you are inthe menu, press MENU 1/Menu 2 repeatedlyto advance through the Menu categories.3. Press ENTER to select a category.The current default setting displays.4. Press ©/Reset repeatedly until you see theselection you want.5. Press ENTER to set a selection as the default.An asterisk (*) will appear to indicate the newdefault setting.Note: Some categories include a number ofitems. In such categories, after you pressENTER in step 3, press MENU 1/Menu 2to advance to the next selection beforeproceeding to step 4.Summary of Level-2 Categories:• PRINT MODE• MEMORY USAGE• AUTO OPERATION• DARKNESS CONTROL• POWER SAVING• LOW TONER• TONER SAVING• CLEARABLE WARNINGS• ERROR REPORT• PARALLEL I/F• RS232C SERIAL• LANGUAGELevel-2 Menu SettingsLevel-1 Menu Categories (e.g., PRINT MODE),Items (e.g., RESOLUTION) and Selections (e.g.,600x1200 DPI, 300 DPI) are summarized below:default selections are in italic (e.g.,600 DPI).PRINT MODERESOLUTION600 DPI600x1200 DPI300 DPINotes: Select print density in dots per inch.When a print job is sent at a resolutionwhich is different from this menusetting, it will automatically beconverted and printed at the valueselected in the print job.MEMORY USAGEFONT PROTECTIONAUTOOFF400 KBNotes: HP PCL 6 mode: Sets the font cachesize. If you change settings, the printermemory will be reconfigured and alldownloaded fonts and PCL macroswill be lost.PostScript mode: Fixed at automatic:other settings not implemented at thistime.MEMORY FREE AREA####KB/ReadOnlyNotes: Displays memory area available fordownloading fonts (cannot be changedthrough the menu). |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine