Oak Stoves ZETA10L, ZETA10P, ZETA10C Operation & Installation Manual
                      | |
Zeta 10 Series Manual - V1.1 © Oak Stoves 201621Warranty & GuaranteeThis stove is manufactured to the highest quality levels and if operated correctly as detailed inthis manual will give you many years of care free operation and minimal periodic maintenance.The overall construction of the stove is guaranteed for a minimum of 10 years.Some of the items which are deemed as consumable are not part of this guarantee or warrantyplease refer to the parts list on page 15 and the column marked warranty as this clearlyshows which items are covered under the warranty and which are deemed as consumableand not covered.The overall paint finish of the stove is not covered by the warranty, you will find you mightwell wish to repaint the body after a period of time. We recommend purchasing this heatproofpaint from Oak Stoves as this will ensure there is no chemical reaction with another heatproof paint.Only certified heatproof paint can be used on the exterior of the stove which are certified upto a minimum temperature of 650°C.The terms and conditions for this warranty to apply are as follows:The stove is professionally fitted by a HETAS approved and registered engineerand you have registered your stove with Oak Stoves and completed the registrationdetails on page 4 of this manual.The stove is operated fully in accordance with this operating manual.The warranty only covers fair wear and tear only, it does not cover any abuse orany issues of over fuelling or miss fuelling as this will totally void this warranty andguarantee. Misuse of the stove which could be caused by over loading the stove orburning products that are not listed within this manual. No general waste productsincluding food, plastics, rubber products or aerosols of any description (this list isnot exclusive) should be burnt on this stove only the recommended fuels.Oak Stoves takes no liability whatsoever for not operating this stove in accordancewith this manual.Oak Stoves has no responsibility for the installation of this stove, but for anyelement of this stove to be covered by warranty it must have been fitted by HETASapproved installer in line with the current and up to date building regulations asdefined by the current building control legislation.If you require any of the consumable parts for this stove please contact our helplineor email our customer service department or contact the retailer who you purchasedthis stove from.Installation Instructions |
Related manuals for Oak Stoves ZETA10L, ZETA10P, ZETA10C
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine