Oakton pH 5+ Instruction Manual

Also see for Ion 6+: Instruction manual Instruction manual

Contents

Oakton pH 5+ Instruction Manual Manual pdf 18 page image

Instruction Manual pH 5+, pH 6+, Ion 6+4. MEASUREMENTTaking Measurements1. Before measurement, rinse the pH/ORP electrode or Ion Selective Electrode andtemperature probe with clean water.2. Power on the meter. Press key to select your desired mode of operation (pH,mV, Ion, or Temperature).3. Dip both probes gently into an aqueous test sample, swirl or stir gently and allow thereading to stabilize.Holding & Releasing a ReadingTo freeze or hold a displayed reading, press . The “HO” annunciator indicates thatthe HOLD function is activated. Press again to deactivate the HOLD function. Themeter reverts to current measurement mode, and the “HO” annunciator will disappear.15