Observint ECO4IR Installation Instructions Manual
                                                                                  | |
Contents
| 
94-Camera H.264 Security System Setup GuideSECTION 2: INSTALLING YOUR SYSTEM2.3 Install and setup a monitor1. Install and setup your monitor in accordance with the instructions provided with the monitor. Do not power it on at this time.2. Cable the DVR Monitor Out (VGA) connector to your monitor’s VGA input. You can also use the monitor out BNC interface, butthe signal quality is better through the VGA interface.Monitor Out(BNC)Monitor Out(VGA)NOTE Some monitors have multiple inputs such including VGA ,HDMI, BNC, etc. If you are using this kind of monitor, configure yourmonitor to display the input from your DVR.2.4 DVR installation2.4.1 PlacementYour monitoring and recording equipment is central to constant surveillance and the reliable capture of video evidence. We stronglysuggest that it be installed in a secure location with access limited to authorized personnel.DVRs generate heat and should be placed in a ventilated area. A high temperature environment will reduce the life span andreliability of the equipment. Additionally, the DVR is not weatherproof, so avoid exposure to liquids and excessive dust. Do not placeobjects along the sides or behind the DVR that will block airflow through the unit.Uninterruptible power suppliesIt is strongly suggested that power to the system be routed through an uninterruptible power supply (UPS). These devices will keepyour security system running through most power outages, in addition to providing excellent surge and sag protection. The UPSshould support your video recorder and all cameras to ensure normal operation during abnormal power conditions. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine