Universal Functions 1-33Universal FunctionsThis section describes the functions that are common to all operations. Refer totheir individual sections for information on changing specific settings..Auto Power-off FunctionIf no key is pressed for a certain period of time when the copier is in the Readymode or the Energy Saver mode, it will automatically turn off.NOTE.• You can specify the Auto Power-off function’s timer settings from 1 to 4 hours. (See“Changing the Auto Power-off Time,” on p. 2-33.).Energy Saver ModeWhen the copier is not being used for copying for an extended period of time,lowering the temperature of the fixing unit can help economize on electricity. This iscalled the Energy Saver mode. Press (Energy Saver) to put the copier into theEnergy Saver mode. Press (Energy Saver) again to wake it up for normaloperation.NOTE.• You can set the energy saving level to -10%, -25%, or -50%, or specify Return toStandard Mode. (See “Changing Settings for the Energy Saver Mode,” on p. 2-10.).Auto Drawer Switching FunctionIf the currently selected drawer or the paper deck (option) runs out of paper duringa Copy job, the copier automatically locates another paper feeding location loadedwith the same size paper, and begins feeding paper from that paper feedinglocation.NOTE.• The Auto Drawer Switching function does not apply to the stack bypass and drawers thathave been designated as the feeding location for transparencies.• You can set whether or not each of the drawers and the paper deck (option) is subject toAuto Drawer Switching. The default setting is for all paper feeding locations. (See“Setting a Drawer and the Paper Deck for Auto Paper Selection/Auto Drawer Switching,”on p. 2-13.)Before You Start Using This Copier1
