Use the Océ TDS100 29Copy on cut sheet media (manual sheet feed)IntroductionYou can make the copies manually on all configurations.The main steps of every manual copy-job are the following.1. Feed the original2. Feed the cut sheet3. Set up your copy job at the operator panel4. Press the green start button.Before you beginTurn on the Océ TDS100.(see ‘Turn on and off the Océ TDS100’ on page 24).Attention: Feed strongly curled originals carefully, because the OcéTDS100 pulls in the original.How to copy manually1. Place the original centrally and face down on the original feed tableThe Océ TDS100 moves the original to the back.[8] Feed the original centrally and face down[8] Feed the original centrally and face down
