Oce VarioLink 3050cp User Manual

24 – VarioLink 3550cp Series User’s GuideHow to Change the Settings:Administrator __________________You can set whether to ENABLE or DISABLE each category in theuser menu.Disabled categories are not displayed in the User’s menu. Only asystem administrator can change these settings.1. Turn OFF the printer. Turn ON the printer while pressing theEnter button.When Boot Menu appears, take your finger off the button.2. Press the Enter button.3. When Enter Password appears, press the up or downMENU button, each time followed by Enter, then Enterseveral times to input the 1st line of the your password, andthen press the Enter button.Enter your 4 to 9 digit password.(The default password is aaaaaa).4. Press the Enter button.5. Press the up and down MENU button until the “category”you want to change is displayed.6. When it is, press the Enter button.7. Press the MENU up button or MENU down button until the“item” you want to change is displayed.8. When it is displayed, press the Enter button.9. Using the MENU up button or MENU down button, identifythe parameter as required.10. Press the Enter button to enter an asterisk (*) on the rightside of the setting selected.11. Press the On Line button to switch to online. The machinewill automatically re-boot.