11 Utility Tool11-34 VarioPrint 110511.4 NetWareThis printing system works with IPX/SPX (Internetwork Packet Exchange /Sequenced Packet Exchange).This section explains how to configure a NetWare File Server, a NetWarePrint Server, and a NetWare queue.The print controller supports the system environment described below.Setup for NetWare 3.xBefore setting up NetWare, you have to define the print server name, etc.,from the Web Utilities.The setup procedure of NetWare 3.x is as follows. To perform this procedure,you need authorization to perform this procedure.1 Start up PCONSOLE and select the file server to use.– Refer to the manual of Novell NetWare for setting up withPCONSOLE.2 Generate and assign a print queue.3 Define the network interface card as the print server.4 Define the notification list/password as necessary.5 Set up the primary file server as necessary.On completion of setup, turn off the main power of the print controller andthe main body printer and turn it on again.The main body printer will print out a Status Page indicating the file serversequipped with print server and the queues that the file servers will service.2 NoteDefine the primary file sever if the network connects to many sites andhas more than one file server. PCONSOLE should be used to set up theprimary file sever.NetWare Version Protocol Emulation Service ModeNetWare 3.2 IPX Bindery Pserver/RprinterNetWare 4.x IPX NDS Pserver/NprinterNetWare 5.x IPX NDS PserverNetWare 6 TCP/IP NDPS(lpr)
