Oce VarioPrint 6180 Titan Maintenance Manual

Contents

Clean the glue cleaning rollersOpen the doors and coversIntroductionThis procedure is only intended for key operators who received the special maintenance training.When to doCertain media may contain substances (for example ink or wax) that pollute the machine. Thispollution can lead to decreased image quality and/or machine damage. Depending on the amountof substances, you must clean the glue cleaning rollers at a certain interval. Consult your servicetechnician if you need advise.Before you beginMake sure that the machine is switched off.Required toolsService key (supplied with the machine)Socket wrench 10 (supplied with the machine)Heat-resistant gloves (supplied with the machine)Offset pads (supplied with the machine)Large sheets of paper to protect the OPCOcé Cleaner P (supplied with the machine)Océ Cleaner KOcé Cleaner TCAUTIONHot area. Use heat-resistant gloves.Procedure1. Select the maintenance task from the list of the required and suggested maintenance tasks.[System] view -> maintenance section -> press the [Start maintenance] button.2. Press [Start] to start the maintenance wizard.CAUTIONMake sure that the machine is switched off. Opening the doors too soon can possiblycause injury.3. Use socket wrench 10 to loosen the bolt of the front doors (2).Clean the glue cleaning rollersChapter 3 - Maintenance tasks - Level 2 73Océ VarioPrint 6000 line