Océ cm3522/cm2522 2-11Using copy functions 22.5 Selecting original and copy settingsThe type of original and copy can be specified.The following original and copy settings are available.*1 If "1 > 2" or "2 > 2" is selected, specify the binding margin position for thecopy and the orientation of the loaded original, otherwise the copies will notbe printed as desired.For details on specifying the original orientation, refer to "Selecting theoriginal orientation (Original Direction settings)" on page 1-18.*2 If "2 > 1" or "2 > 2" is selected, select the position of the binding marginand the orientation of the loaded original, otherwise the copies will not beprinted as desired.For details on specifying the original orientation, refer to "Selecting theoriginal orientation (Original Direction settings)" on page 1-18.For details on specifying the binding margin position of the original, refer to"Selecting the position of the binding margin (Original Binding Position/Binding Position settings)" on page 1-20.!DetailWhen the original is scanned from the original glass using the "1 > 2", "2 > 1" or"2 > 2" settings, the scanned pages are stored and printed together.Follow the procedures described below to select original and copy settings.Setting Description1 > 1 Select this setting to produce single-sided copies from single-sidedoriginals.1 > 2*1 Select this setting to produce one double-sided copy from two single-sided originals.2 > 1*2 Select this setting to produce two single-sided copies from one double-sided original.2 > 2*1*2 Select this setting to produce double-sided copies from double-sidedoriginals.
