Océ cm3522/cm2522 5-7Installation on Macintosh computers 5Specifying the IPP settingsSpecifying the TCP/IP setting for this machineSpecify the IP address of this machine.!DetailFor details on specifying the IP address of this machine, refer to the User’s Guide [NetworkAdministrator].IPP setting for this machineEnable IPP print in the IPP Setting screen of this machine.!DetailFor details on the IPP settings of this machine, refer to the User’s Guide [Network Administrator].Specifying the TCP/IP setting for the computerSpecify the TCP/IP setting for the Macintosh computer connected to this machine.1 On the "Apple" menu, select "System Preferences".2 Click the "Network" icon.3 From "Show", select "Built-in Ethernet".4 Click the TCP/IP tab.5 Select "Configure" items according to the settings for the network to which the Macintosh computer isconnected, and then specify the IP address and subnet mask.6 Click the close button at the upper left corner of the dialog box.– When the "Apply configuration changes?" message appears, click the [Apply] button.Adding a printer1 Select "HDD" - "Applications" - "Utility" where the driver was installed, and then double-click "PrinterSetup Utility" or "Print Center" to open it.2 When the Add Printer dialog box appears, click the [Add] button. When the printer list appears, clickthe [Add] button.– If available printers have already been set up, the Add Printer dialog box does not appear.The "Printer Browser" appears.3 Click the [IP Printer] button.4 From "Protocol", select "IPP".5 In "Address", enter the IP address of this machine. In "Queue", enter "ipp".
