Océ cm3522/cm2522 1-90Setup items by operation 11.32 Providing notification of the status of this machine (E-mail)Specify settings for notifying the administrator of the machine status via E-mail.Using this function provides notification for a specified address when a warning message occurs on thismachine.Communication by combining POP before SMTP, APOP, SMTP authentication or encryption using SSL/TLSis available. For details, refer to "Sending scan data by E-mail" on page 1-23.Specify the settings according to the following flowchart.1.32.1 TCP/IP SettingsSpecify settings to use this machine in a TCP/IP network environment.For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2.1.32.2 E-mail TX (SMTP)In Administrator mode of Web Connection, select the Network tab - "E-mail Setting" - "E-mail TX (SMTP)".Specify the following settings.TCP/IP SettingsE-mail TX (SMTP)Status Notification SettingCommunicate with theSMTP server usingSSL/TLS?SMTP Authentication? POP before SMTP?Yes No Yes No Yes NoSMTP over SSL/Start TLS SMTP Authentication POP before SMTP➀ POP over SSL?➁ APOP?Yes No➀ POP over SSL➁ APOP AuthenticationFinishItem Definition Prior confirmationE-mail TX Setting Select "ON".E-mail Notification Select "ON".SMTP Server Address Specify the SMTP server address. (Format: "***.***.***.***",Range for ***: 0 to 255)If the DNS server is specified, the address can be specifiedusing the host name.This item can also be specified with IPv6.Address of the serverPort Number Default setting: 25Specify the port number.Port number for the serv-erConnection Timeout Specify the time period before the server connection timesout.Max Mail Size Select whether to limit the size of sent messages.
