15USER AUTHENTICATIONWhen the administrator of the machine has enabled user authentication, one of two screens shown below will appear. Ifeither screen appears, enter the user number or login name and password that you received from the administrator.When controlled by user number When controlled by login name and password(Different items will appear in the screen when LDAPauthentication is used.)AUTHENTICATION BY USER NUMBERThe following procedure is used to log in using a user number received from the administrator of the machine.Admin LoginEnter your user number.OKPlease enter your login name /password.User AuthenticationLogin NameUser NamePasswordAuth to:OKLogin Locally1Enter your user number (5 to 8 digits)with the numeric keys.Each entered digit will be displayed as " ".2Touch the [OK] key.After the entered user number is authenticated, the user countscreen will appear briefly.The number of pages remaining appears when page limitshave been set in "Pages Limit Group Registration" in thesystem settings (administrator). (The remaining number ofpages that the user can use in each mode (copy, scan, etc.)appears.) The amount of time that this screen appears can bechanged using "Message Time Setting" in the system settings(administrator).When the user number is an 8-digit number, this step is not necessary. (Login takes place automatically after the usernumber is entered.)Enter your user number.Admin LoginEnter your user number.OKUsage status : used/remaining pagesBlack-white :87,654,321/12,345,678Full color :87,654,321/12,345,6782-color :87,654,321/12,345,678Single color :87,654,321/12,345,678