8 Appendix8-2 im7520/im6020Appendix Chapter 88 Appendix8.1 Error Message ListIf any of the following error messages appear, perform the operations de-scribed below.Message Cause and RemedyCannot connect to thenetwork.A connection to the network could not be established. Check if thenetwork cable is correctly connected. In addition, check that the Net-work Setting parameters on the Administrator Setting screen havebeen correctly specified.The destination cannotbe selected because thenumber of destinationshas exceeded the max.number of broadcastingpossible.The number of destinations specified exceeds the number possiblefor a broadcast transmission. Reduce the number of broadcast des-tinations, or send the transmission in multiple batches.Image could not besaved in User Box due toinsufficient capacity inHDD. Please check JobHistory.The hard disk is full. Delete unnecessary data, and then try saving theimage.The number of User Boxhas reached its maxi-mum.The number of user boxes that can be registered has reached themaximum number possible. Delete unnecessary user boxes, andthen try registering new boxes.The number of docu-ments in User Box hasreached its maximum.The number of documents that can be saved in a user box hasreached the maximum number possible. Delete unnecessary docu-ments, and then try saving the document.The number of jobs hasreached its maximum.Please wait until a job iscompleted.The number of jobs that can be programmed has reached the maxi-mum number possible. Wait until a job has been completed, or de-lete a current job.
