Oceanic Systems NMEA2000 User Manual
Also see for NMEA2000: User manualInstallation and operating instructions
          | |
INTRODUCTION12 of 8The Oceanic Systems’ 4410 16 Channel Switch Input Module monitors switch closure devices andreports their status over the NMEA2000® network.These devices can include fire/smoke/carbon monoxide detectors, bilge and flood floatdetectors, doorway and porthole closure detectors, valve status detectors and many more.With this module and suitable NMEA2000® displays the status of all these items can be viewedanywhere on the vessel.The unit has PLC quality inputs that are manufactured to IEC 61131 and IEC61000 standards sothey are optically isolated and fully protected against ESD, Voltage Surges and Transients toensure the most reliable operation at all times.It is compatible with either 12 or 24 Volt systems and requires NO user setup menus but thesimple setting of two small rotary address switches so multiple Switch Input Modules can existon the same network.The connections to the unit are made via boat builder preferred WAGO Cage Clamp terminalblocks which allow either solid or multistranded wires from 0.08 to 1.5mm² to be connectedquickly and securely. Each switch input also has a tell tale green LED to indicate when it isactive.The 4410 can be either panel mounted or din rail mounted using the mounting clips provided.This unit is designed to operate in a protected marine environment such as an engine room. It isvery important that it is installed and set up correctly according to this manual. Please read andfollow the installation and setup instructions carefully to achieve the best results.1.1 FIRMWARE REVISIONThe information in this manual corresponds to firmware revision 1.001.2 PRODUCT FEATURESThe 4410, NMEA2000® 16 Channel Switch Input Module has the following features:• 16 opto isolated input channels• PLC quality inputs compatible with standard IEC61131-2 Type 1 and Type 3 Inputs• Protected against ESD, Voltage Surges and Transients to IEC61000-4-2,4 and 5• Indicator LEDs for each active input• Switch settable Device Instance• Boat Builder Preferred WAGO Cage Clamp Terminals• Compatible with 12 or 24 Volt Systems• Panel or DIN rail mounting option |
Related manuals for Oceanic Systems NMEA2000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine