6. MAINTENANCE__PAGE 57 *Cover your boat so that snow and water will not gather inside. Always makesure that there is enough ventilation and avoid direct contact between theboat and the covering material / canvas as it may damage the boat due tofriction and oxidation.6.4.2 Measures after winter storage Check the engine owner’s manual and carefully follow the instructions. *Reinstall freshly charged batteries and check voltage. Refuel the boat. *Install any electronic instruments, textiles and other equipment that wasremoved before winter storage. Test them after installation or at first time in seabefore leaving the shore. Reinstall bottom drain plug. Check the condition of the hull. Repair damages directly. Refresh antifoulingpaint if it has been used before, or consider adding new paint if the boat ismoved to new waters (see chapter 6.2.2.). Inspect fuel and ventilation hoses and connectors, check for any signs of wear &tear and leakage. Inspect fire extinguisher as per separate owner’s manual. Carryout maintenance operation on other accessories and equipment asdescribed in this chapter and in the respective OEM manuals.6.5 SPARE PARTS & SERVICETo ensure the best possible performance, safety and lifetime of your boat, it is importantonly to use high-quality spare parts that are suitable and approved for your specific boatapplication. Failure to do so may jeopardize safety, lifetime and performance. Ockelbooffers parts through the dealer network.Parts and accessories fitted on the boat are subject to modifications without priornotice. Your dealer will be able to investigate if such is the case for your specific needs.Your dealer can also support you with qualified service, upgrade and modification work,using their own or Ockelbo specialists.If you have any questions regarding parts, accessories or services, please contact anOckelbo dealer. Please have your CIN code available.