UNPACKINGAfter unpacking the unit, inspect carefully for any damagethat may have occurred during transit. Check for loose,missing, or damaged parts. If any damage is observed, ashipping damage claim must be filed with the carrier. DONOT use the OEMTOOLS™ 18"/24" Heavy Duty WorkstationFan if broken, bent, cracked or damaged parts (includinglabels) are noted. Any Workstation Fan that appearsdamaged in any way, operates abnormally or is missingparts should be removed from service immediately. If yoususpect that the Workstation Fan was subjected to shockload (a load that was dropped suddenly, unexpectedly,etc.), immediately discontinue use until it has beenchecked by a factory authorized service center.Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourselfand others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result inpersonal injury and/or damage to product or property. Please retain instructions for future reference.Operating Instructions and Parts Manual 24895 / 248969/172017 OEMTOOLS™FOR CUSTOMER SERVICETechnical Question?CALL 1-866-458-2472customerservice@oem-tools.com18"/24" HEAVY DUTYWORKSTATION FANThank you very much for choosing an OEMTOOLS™ Product!For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:Model: _______________ Purchase Date: ___________Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this productbefore you begin using it. This product is designed for certain applications only. OEMTOOLS™ cannot be responsible for issues arisingfrom modification. We strongly recommend this product is not modified and/or used for any application other than that for which it wasdesigned. If you have any questions relative to a particular application, DO NOT use the product until you have first contacted customerservice to determine if it can or should be performed on the product.The following safety information is provided as a guideline to help you operate your Workstation Fan under the safest possible conditions. Any toolor piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not known or not followed. The followingsafety instructions are to provide the user with the information necessary for safe use and operation. Please read and retain these instructions forthe continued safe use of your Workstation Fan. Failure to follow instructions listed below may result in serious injury. In addition, make sure thatanyone who uses the equipment understands and follows these safety instructions as well.WARNINGExplanation of Safety Signal WordsWARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, mayresult in property damage.NOTES: Provide clarity and helpful information.24895 - 18"24896 - 24"