WARNINGThe following safety information is provided as a guideline to help you operate your Tilt Barrel Fan under the safestpossible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safehandling instructions are not known or not followed. The following safety instructions are to provide the user with theinformation necessary for safe use and operation. Please read and retain these instructions for the continued safe useof your Tilt Barrel Fan. Failure to follow instructions listed below may result in serious injury. In addition, make sure thatanyone who uses the equipment understands and follows these safety instructions as well.Explanation of Safety Signal WordsWARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, mayresult in property damage.NOTES: Provide clarity and helpful information.Thank you very much for choosing an OEMTOOLS® Product!For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:Model: _______________ Purchase Date: ___________Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with thisproduct before you begin using it. This product is designed for certain applications only. OEMTOOLS® cannot be responsiblefor issues arising from modification. We strongly recommend that this product is not modified and/or used for any applicationother than that for which it was designed. If you have any questions relative to a particular application, DO NOT use theproduct until you have first contacted customer service to determine if it can or should be performed on the product.WARNING: Pursuant to California Proposition 65, this product contains chemicals known to the state of California tocause cancer and birth defects or other reproductive harm. Wash hands after handling.Operating Instructions and Parts Manual OEM24875Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourselfand others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result inpersonal injury and/or damage to product or property. Please retain instructions for future reference.15/202020 OEMTOOLS®36" TILT BARREL FANFOR CUSTOMER SERVICETechnical Question?CALL 1-866-458-2472customerservice@oem-tools.comUNPACKINGAfter unpacking unit, inspect carefully for any damagethat may have occurred during transit. Check for loose,missing, or damaged parts. If any damage is observed,a shipping damage claim must be filed with the carrier.DO NOT use the OEMTOOLS® 36" Tilt Barrel Fan Manualif broken, cracked or damaged parts (including labels)are noted. Any fan that appears damaged in any way,operates abnormally, or is missing parts should beremoved from service immediately. If you suspect thatthe fan was subjected to shock load (a load that wasdropped suddenly, unexpectedly, etc.), immediatelydiscontinue use until it has been checked by a factoryauthorized service center.