Officezone IDEAL 4810 (18-3/4'') Operating Instructions Manual
        | |
Contents | 
2Safety Rules• Ensure that at no time more than one person is working at the machine.• Leave the key for the safety lock with the person responsible for the cutting machine.• Power operated cutting machines must be operated only by trained and reliable personnel. Part ofthe training is to become familiar with the operating instructions.• The operating instructions must be accessible at any time and must be strictly observed.• Do not reach into cutting area while the knife is in operation.• Change knife and cutting stick only with the main switch in “off” position. For other maintenanceand repair, which requires removal of machine covers, always disconnect the plug.• Defects in or damage to cutting machines, which affect the safety, must be repaired immediately.Until such faults have been eliminated, the cutting machine must be put out of operation.• Annual routine inspection by specially trained service technicians are recommended for all safetydevices, particularly the electrical control measures in the cutting machine. Records should bekept of these safety inspections.• Transportation of knives is only allowing specially designed wooden cases supplied by your localdistributor. When inserting knife into the wooden case, ensure that the sharp edge lies flush withthat side of the case into which the holes for the securing screws have been drilled.• IMPORTANT – The safety rules must be strictly observed. Please make sure that you arefamiliar with the operation of the paper cutter.InstallationThe entire machine is dispatched in one package, but the stand (#7) and the hand wheel (#19) forthe paper clamp have been dismounted from the machine.The tool box contains:- a set of tools for service and maintenance,- the mounting hardware for the stand,- the back gauge crank (#3) with a mounting screw,- two keys for the safety lock.• Place machine (#1) on stand (#2).• Insert securing bolts for the stand into provided holes and secure with nuts.• Place paper tray (#8) into the stand (#7).• Mount the hand wheel for the paper clamp (#19) and the crank for the back gauge (#3). Securethese parts with provided screws.• Connect power cord with plug to a normal single phase AC socket.The machine is now ready to be operated. |
Related manuals for Officezone 4810
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine