OfiTE 173-00-C Instruction Manual
Also see for 173-00-1-C: Instruction manual
                    | |
OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com12TimerThe timer can be programmed to turn the heaters on and off throughout theweek. Each set of on/off operations requires setting an ON time and anOFF time separately. During programming, the following symbol will appearon the display.When programming the ON time, the up arrow will blink. When programmingthe OFF time, the down arrow will blink.To Set to the Correct Time:1. Turn the “Heat” switch on the control panel to the ON position.2. Set the “Out 1 switch - On-Auto-Off” to the AUTO (middle) position3. Set the “P1, P2, Run” button to P1 to activate programming mode forOutput 1.4. Open the panel door and press and hold the “TIME ADJ” button until ablinking clock appears.5. Press the “h” and “min” buttons to set the correct local time.6. Press “WRITE” when finished.7. Set the “P1, P2, Run” button to P1 to show the time.Panel DoorFolds Down |
Related manuals for OfiTE 173-00-1-C
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine