Oki B2200 User Manual

Also see for B2400n: Configuration guide Setup guide Safety & warranty User guide User guide

Contents

Oki B2200 User Manual Manual pdf 11 page image

Print media > 115. Load the sheet to be printed, top edge first, print side up,into the feeder and push it gently until you feel slightresistance. The printer will advance the paper a shortdistance and retain it and the Load Paper light will stopflashing.When the page image has been processed the paper will bedrawn into the printer and your printed page will be ejectedinto the output tray.TRANSPARENCIES AND LABELSChoose transparencies designed for use in plain papermonochrome copiers, as they are required to withstand hightemperature and pressure. These usually have a print side whichfeels slightly rougher (matt finish) than the back, which is a littlemore glossy.Transparencies tend to feed more reliably in the manual feederthan when stacked in the input tray.Choose sheets of labels designed for use in laser type printers orcopiers. The labels should cover the entire sheet, leaving no partof the backing sheet exposed, otherwise they will tend to peel offinside the printer.LOADING TRANSPARENCIES AND LABELSIt is recommended to use the manual feeder for this type ofmedia, as described earlier for paper.NOTEPages are ejected face up. For multipage documents you maywant to choose reverse print order in your print dialogue ifyour application offers it.CAUTION!Do not use transparencies designed only for handmarking on an overhead projector. These will meltinside the printer and cause serious damage.