Oki B410d User Manual

Also see for B410DN: Configuration guide Specifications Safety & warranty Setup guide User guide

Oki B410d User Manual Manual pdf 56 page image

Overlays and Macros (Windows only) > 56CREATE AND DOWNLOAD THE PROJECT1. From the Windows Start menu, start Storage Device Manager (SDM) and allowSDM to discover the printer.2. Choose Projects→New Project.3. Choose Projects→Add File to Project.4. Set the Files of Type drop-down list to PRN Files(*.prn).5. Navigate to the folder where the.PRN files are stored and select one or more of theseto include in your overlay set.You can have more than one printer (.PRN) file in a project. For example, one for toppages and another for continuation pages. Use standard Windows techniques (Shiftor Ctrl keys) to select multiple files simultaneously if you need to.6. Click Open to add these files to the current project.7. When a message box appears confirming that a filter file has been created, click OKto clear the message.8. The project window will display one.HST file for each printer file added. Make acareful note of each of these names. Ensure that you note them exactly as theyappear, they are case sensitive, and you will need them later.9. Choose Projects→Save Project and enter a meaningful name (e.g. “LetterStationery”) so that you can recognise it later if you want to modify it.10. Choose Projects→Send Project Files to Printer to download the project to theprinter.If you have a hard disk in the printer, SDM will automatically download files to it. Ifnot, SDM will download files to flash memory. If you have a hard disk but still preferto download to flash memory, double-click the file name in the Project window andunder Volume, type in %Flash0% and then click OK.11. When the message “Command Issued” appears confirming that the download iscomplete, click OK to clear the message.TEST PRINTING THE OVERLAY1. Click on the printer icon for the relevant printer and choose Printers→Test Form.2. In the Test PostScript Form window, to test each overlay select it and click OK. Therewill be a short pause while the printer processes the form, and then it will print.3. When each overlay has been tested, click Exit.4. Click the standard Windows Close (X) button, or choose Projects→Exit to closeStorage Device Manager.DEFINING OVERLAYSThis is the final step before the new overlays are ready for use.1. Open the Printers (called “Printers and Faxes” in Windows XP) window via the Startmenu or the Windows Control Panel.2. Right-click on the Relevant PostScript printer icon and choose PrintingPreferences from the pop-up menu.3. On the Overlay tab, click the New button.