Oki B4250 User Manual
Also see for B 4350N: Configuration guideWarranty and legal guideInstallation instructionsInstallation instructionsInstallation instructions
                                                                                        | |
Contents
| 
CONSUMABLES AND MAINTENANCE > 67REPLACING THE IMAGE DRUMIt is recommended that you change the toner cartridge and clean theLED array at the same time as you change the image drum.1. Press the cover release and open the printer’s top cover fully.2. Remove the used image drum and toner cartridge.3. Follow the installation instructions on or inside the boxcontaining the new image drum to install the new image drum.4. Follow the installation instructions on or inside the boxcontaining the new toner cartridge to install the new tonercartridge.5. Gently wipe the LED array surface with the LED lens cleanerthat came with the new toner cartridge or soft tissue.6. Close the top cover and press it down to latch it closed.CAUTION!The green image drum surface at the base of the cartridge is verydelicate and light sensitive. Do not touch it and do not expose it tonormal room light for more than 5 minutes. If the drum unit needs to beout of the printer for longer than this, please wrap the cartridge insidea black plastic bag to keep it away from light. Never expose the drumto direct sunlight or very bright room lighting. Always hold the imagedrum unit by the ends or from the top.WARNING!If the printer has been powered on, the fuser may be hot. This area isclearly labelled. Do not touch. |
Related manuals for Oki B 4350N
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine