Using Storage Device Manager: Testing PCL Macros • 10Testing PCL MacrosWith Storage Device Manager open and the printer iconhighlighted:1. Click Printers → Test Macro.The Test Macro dialog box appears.2. Enter the ID number for the macro file you wish toprint.Note: If you don’t have the ID number at hand, youcan obtain it by printing a File List (seepage 10). The macros with their ID numberswill appear at the bottom beside File, underVolume 0. E.g., for the macro entry0:\pcl\macros\2::OKI.BIN, enter 2 for the IDnumber.3. Click OK.Command Issued appears.4. Click OK and wait for the macro to print.Maintaining the Flash MemoryPrinting a Font ListThe Font List shows all PCL fonts in the printer, theirescape codes and print samples. Fonts stored in theFlash memory are at the end of the list under “DiskResident Fonts.”With Storage Device Manager open and the printer iconhighlighted:1. Click Printers → Print PCL Fonts.The Command Issued dialog box appears and theFont List prints.2. Click OK.Printing a File ListThe File List shows all the files stored in the Flashmemory along with their location (path). It also showsthe ID number for stored PCL macros.With Storage Device Manager open and the printer iconhighlighted:1. Click Printers → Print File Listing.The Command Issued dialog box appears and theFile List prints.2. Click OK.