Oki B6100n Safety Information Manual

Also see for B6100n: Configuration guide Brochure & specs User guide User guide Brochure & specs

Contents

Oki B6100n Safety Information Manual Manual pdf 3 page image

English 3Customer Support Professionals: Latin AmericaOur customer support professionals are trained and certified onall current OKI products. Make sure that you are close to yourprinter when you call one of our OKI authorized service centersso that you can describe your problem more accurately.Customer support professionals can answer your questionsregarding:• Location of nearest Authorized Service Center• Installation of your machine• Usage/normal maintenance of your machine• Error message interpretation/solutions• Parts and supplies identification• Consumer relationsProduct Identification and Use ______________B6100 Black Toner, P/N 52113701For more information, contact Oki Data at 2000 Bishops GateBlvd., Mount Laurel, NJ, 08054-4620.Emergency Information: Call 1-800-654-3282; US & CanadaOnlyHazardous Ingredients _____________________Styrene/acrylate copolymer (55-60% by weight)CAS#: Not availableIron oxide (35-40% by weight)CAS#: Not availablePolypropylene (less than 3% by weight)CAS#: Not availableAmorphous silica (less than 1% by weight)CAS#: Not availableChromium/azo dye complex (less than 1% by weight)CAS#: 84179-66-8, 10-125-50-0, 109125-51-1Physical Data ______________________________Physical State: SolidMelting/Freezing Point: Not availableBoiling Point: Not applicablePH: Not available.Vapor Pressure: Not applicableVapor Density (Air=1): Not availableEvaporation Rate (Butyl Acetate=1): Not availableSpecific Gravity (H2O=1): Not availableSolubility in water: NegligibleSolubility in solvents: Not availableCoefficient of water/oil Distribution: Not availableAppearance and odor: Black powder, faint odorOdor Threshold: Not availableFire and Explosion Hazard Data _____________Flammability: Not flammable under conditions of use.Extinguishing Media: In case of fire, use extinguishing media(water spray, foam, dry chemicals). When in a machine, treat asan electrical fire.Flash Point (OC): Not applicableLower Explosive Limit: Not applicableUpper Explosive Limit: Not applicableAuto-ignition Temperature: Not applicableHazardous Combustion Products: Not applicableExplosion DataLike most organic materials in powder form, it can formexplosive mixtures when dispersed in air.Sensitivity to Mechanical Impact: Not availableSensitivity to Static Discharge: Not availableReactivity Data ____________________________Stability: StableConditions to Avoid: Not availablePolymerization: Not availableHazardous Decomposition Products: Not availableIncompatibility: Not availableToxicological Properties ____________________Routes of Entry: Inhalation, Ingestion, Eyes, SkinEffects of Acute Exposure: Practically non-toxicSwallowed LD50 (rat): >5.0 g/kg 1 )Skin LD50 (rabbit): >2.0 g/kg 1 )Inhaled LC50 (rat): >5.0 mg/L/4hr1 )Effects of Chronic Exposure:The results obtained from a sponsored, Chronic Toner InhalationStudy, demonstrated no lung change in rats for the lowest (1 mg/m 3 ) exposure level (i.e. the level most relevant to potentialhuman exposure). A very slight degree of fibrosis was noted in25% of the animals at the middle (4 mg/m 3 ) exposure level,while a slight degree of fibrosis was noted in all the animals atthe highest (16 mg/m 3 ) exposure level. These findings areattributed to "lung overloading", a generic response to excessiveamounts of any dust retained in the lungs for a prolonged period.This study was conducted using a special test toner to complywith EPA testing protocol. The test toner was ten times morerespirable than commercially available OKI toner, and wouldnot be functionally suitable for OKI equipment.1 )Exposure Limits:ACGIH TLV (2002):10 mg/m 3 (Total)3 mg/m 3 (Respirable)Irritancy: Not an irritant1)Material Safety Data SheetMSDS#58358601

/ 6

Related manuals for Oki B6100n