INSTALLATION AND RELOCATION PROCEDURE > 9INSTALLATION AND RELOCATIONPROCEDUREThe following sections guide you through the process of installing andsetting up your printer right through to making a test print from anapplication. Complete the entire installation procedure to ensure a properinstallation.SAFETY PRECAUTIONSThis printer is available in either of the following power specifications:110V and 220 – 240V. The specifications that apply to your printerdepend on your configuration. To prevent fire or shock hazards, connectthe power plug only to a properly rated power outlet.HANDLING THE PRINTER• The printer is very heavy and should always be lifted by twopeople. The printer with consumables weighs 20.4kg (45lb)(B6200) or 22.6kg (50lb) (B6300). Never attempt to lift theprinter alone.• To lift the printer, have two individuals facing each other from thefront and rear of the printer grasp the recessed areas on each sideof the printer. Do not lift the printer by grasping any area otherthan these recessed areas.• When lifting the printer, maintain proper lifting posture to preventinjuries.• Other safety information is contained in the Installation Safety orWarranty and Regulatory Information booklet supplied with thisproduct and should be read prior to setting up the printer.