|
B6250/B6500 User’s Guide> 113Light ofindicator isblinking.An error that you cannot rectify yourself has occurred. Recordthe displayed error message or error code, switch off thepower, pull out the power plug from the outlet, and thencontact service.Although noprint job is sent,the message“Printing” isdisplayed on thecontrol panel(when using theparallelinterface).Did you switch on the power of the computer after switchingon the power to the printer? Pressing the buttoncancels the printing.Check that you switch on the power of the computer whenswitching on the power to the printer.Poor printquality.There may be a problem with the image. Refer to the sectionafter this, “When the Print Quality is Poor” to rectify theproblem.“ When the Print Quality is Poor” (P. 117)The correctcharacters arenot printed(printinggarbage).This printer is printing with non-standard built-in fonts. Checkthe fonts used in the application. Download the necessaryfonts when using PostScript.The printout isdifferent fromwhat is displayedon the screen.Did you change the TrueType font settings to printer fonts?Change to TrueType font printing for [Font Substitution] onthe [Setup] tab of the printer driver.Online Help for the printer driverThe light of theindicator is onand blinking butthere is no printoutput.There are jobs remaining in the printer. Cancel printing orforce the remaining data to be printed.To forcibly print the job, press the button to setthe printer in off-line mode, then press the button. After the job has been printed, press the button again to return the printer to online mode.When a parallel/USB port is used, data may be transmitted inthe middle of a job depending on when the buttonis pressed. In this case, subsequent print data received afterthe button is pressed, will be recognized asa new job. The data will be printed after the off-line mode hasbeen cancelled. Furthermore, it may not be printed properly.Cancelling printing: “ Cancelling/Checking Printing” (P. 19)SYMPTOM REASON/ACTION
|
