B6500 Network User’s GuidePrinting from a Windows Computer - 21OKI LPRThe OKI LPR Utility is network software which supported TCP/IP printingon Windows Me, Windows 98, and Windows 95. It redirects print data fromthe LPR port to the specified IP address.Installing the OKI LPR UtilityThe OKI LPR utility requires that the TCP/IP protocol be installed on yourWindows system. To install the TCP/IP protocol onto your Windowssystem, consult your Windows manual.1. Set up the printer driver and designate the output destination to beLocal Printer (LPT:). For information on setting up your printerdriver, see the printer user manual.2. Insert the CD-ROM provided with your printer into the CDROMdrive. If the Menu Installer doesn't start automatically, clickStart → Run → Browse. Browse to your CD-ROM and clickInstall → Open → OK.3. Select [Network Software].4. Select [Installation/Config]5. Select [Oki LPR].6. Follow the on-screen instructions.7. Select [Install Oki LPR].8. Follow the on-screen instructions.9. Click [Next] when the [Welcome] screen is displayed.10. Verify [Destination Folder] and [Spool Folder] and click [Next].11. Check [Register in Startup] if you want automatic startup asWindows boots up. Check [Launch as Minimized] if you want tostartup in the Icon state and click [Next].12. Verify the program folder name and click [Next]. The installationstarts.13. When the installation ends, the [Setup complete] screen isdisplayed. Check [Yes, I want to launch OKI LPR Utility now] andclick [Finish]. Check [Yes, I want to view the ReadMe File] if youwant to read the Readme file. The OKI LPR utility starts.14. Select [Add Printer] on the [Remote Print] menu.15. Select [Printer] to accept the printer that has been added inStep 1.