Oki B930 Setup Manual

Also see for B930dn: Configuration guide Reference guide Brochure & specs Safety information Installation instructions

Contents

12Connect the USB cable to the USB port on thecomputer, then to the USB port on the printer.Power Up ______________WARNING! Be sure to use only the powercable supplied with your printer! Use of apower cord not supplied with this printer, oran extension cord, could be a safety hazard.1. Insert the power cable. Plug the cable into asuitable grounded outlet.2. Turn the printer on.Caution! Do not connect this product to anuninterruptible power supply (UPS). For moreinformation, please contact Oki Data at 1-800-OKIDATA.Print the Demo Page _____1. Press the MENU key.2. Press the NEXT (!) key until the displayshows INFORMATION MENU.3. Press the SELECT key to enter the menu.4. Press the NEXT (5) key until the displayshows PRINT DEMO.5. Press SELECT. The demo page prints.Load Software__________Windows NetworkNote: For more information see the Networksection in the User Guide.Print the Configuration Sheets1. Turn the Printer ON and wait for the printserver status light to stop blinking.2. Press the INFO button on the Operator Panelto print the Network Information pages. Keepthese sheets handy: they contain informationyou need to set up the printer on yournetwork.Install the Printer Driver1. Insert the CD in the CD-ROM drive. The CD willautorun. If it doesnít, click Start→ Run→ Browse. Browse to your CD-ROM drive,double-click Install.exe. Click OK.2. Select your language.3. Accept the license agreement.4. The installer screen appears.5. Click Install Driver.6. Select network printer.7. Select TCP/IP.8. Enter the IP address.9. Follow the on-screen instructions.Test the Driver Install1. To make sure the printer driver is correctlyinstalled, print a page from any program.2. Reinstall the driver if the installation failed.Using the Web Browser (Optional)Use your web browser to configure print serverand printer menu settings on an embedded webpage.Note: For more details, see the Userís Guide onthe CD supplied with the printer.1. Activate your web browser (MicrosoftExplorer Æ/ô , MozillaÆ FirefoxÆ, Netscape Nav-igator ô 4.4 or higher).2. Enter the IP Address for the printer. Find theaddress on the network Configuration Sheet(see page 12).3. Click on a tab to see a particular category.Utilities and DownloadsNote: You must be connected to the internet todownload utilities.