C5650n/C5650dn Setup Guide6Install SoftwareWindows ® - Network SetupPrint the Configuration Sheets1 Press Menu on the control panel toselect the Information Menu.2 Press Enter.3 Press the down arrow to selectNetwork.4 Press Enter.Keep these sheets handy: they containinformation you need to set up theprinter on your network.Install the Driver1 Insert the CD in the CD-ROM drive. TheCD will autorun.2 Select your language.3 Accept the license agreement.4 Click Install Driver.5 Select network printer.6 Select Directly to the network usingTCP/IP.7 Enter the IP Address.The IP addresscan be found on the ConfigurationSheets.8 Follow the on-screen instructions.Test the Printer Driver InstallationTo make sure the printer driver iscorrectly installed, print a page from anyprogram. Reinstall the driver if theinstallation failed.Using a Web Browser (optional)Use your web browser to configure printserver and printer menu settings on anembedded web page.1 Activate your web browser (MicrosoftExplorer®/ ™, Netscape Navigator™ 4.4or higher, Mozilla®, Firefox ®).2 Enter the IP Address for the printer.(Locate the address on the networkConfiguration Sheets.)3 Click on a tab to select categories.Install Utilities and DownloadsNote: You must be connected to theinternet to install Internetdownloads.1 Insert the CD in the CD-ROM drive. TheCD will autorun.2 Select your language.3 Accept the license agreement.4 Select Optional Utilities or InternetDownloads from the CD installer menubar.5 Click on the utilities and downloads youwant to install and follow theinstructions.Install DocumentationNote: To open the on-line manuals, youmust have Adobe ® Acrobat® Reader5.0 or higher installed.1 Select the Driver Setup tab from theCD installer menu bar.2 Click Install User’s Guide.3 Follow the on-screen instructions tocomplete the installation.4 To view the manuals, clickStart>Programs>OkiData C5650 UserGuide.To Configure options1 Click Start>Settings>Printers on theWindows task bar.2 Right-click the printer icon and chooseProperties.3 Click on the Device Options tab.4 Select the appropriate check box inInstalled Options.5 Click OK to activate the settings.