REPLACING CONSUMABLE ITEMS > 672. Identify the fuser handle (1) on the top of the fuser unit.3. Pull the two fuser retaining levers (2) towards the front of theprinter so that they are fully upright.4. Holding the fuser by its handle (1), lift the fuser straight upand out of the printer. If the fuser is still warm, place it on a flatsurface which will not be damaged by heat.5. Remove the new fuser from its packaging and remove thetransit material.6. Holding the new fuser by its handle, make sure that it is thecorrect way round. The retaining levers (2) should be fullyupright, and the two locating lugs (3) should be towards you.CMYK12322
