Oki Data CONFIDENTIAL43163501TH Rev. 1 100 /(3) To be applied for every model.(3-1) Switch to shipping modeWhen engine control circuit board has been exchanged, it will become factory mode.Therefore you can change it to Shipping Mode.• Change to the menu of [Section 2.4.1.1.2.2 Factory/Shipping mode] in the [Section2.4.1.1.2 PU circuit board setting function] of the maintenance utility.(3-2) Set the desired market [Method of Confirmation: Status Page printing C3400nBecause the default setting is OEL, the desired market must be set at shipment.Note! This setting will be stored in the EEPROM of the BLA circuit board.1. Maintenance circuit board: For international sales/ODA/OEL/APS facing maintenance circuitboard, this setting is left as default at shipment.2. Set the desired market: Set by PJL command or maintenance utility.3. Explanation: PX732 is a common ROM both for domestic and international markets. Whenused in devices of different desired markets, it is necessary to set the desiredmarket (the default is OEL facing)This setting will be stored in the EEPROM of the BLA circuit board.This setting in maintenance circuit board is left as default at shipment, whenput in use, this setting will be executed. If the program version is changed, itwill return to the initial value.Item Description Count DescriptionFuser unit Fuser unit life count A value converted on a A4-size-paper basis fromnumber of pages printed (prints) after installationof a new fuser unitBelt unit Belt unit life count A value converted on a A4-size-paper basis fromnumber of pages impressed (images) afterinstallation of a new belt unitImage drum unit - Black Respective life counts Values converted on a A4-size-paper basis fromImage drum unit - Yellow of image drum units numbers of revolutions after installation of newImage drum unit - Magenta image drum unitsImage drum unit - CyanTotal number of Printer life count Total number of sheets fedsheets fedPages - Black Respective numbers Numbers of pages impressed (images) fromPages - Yellow of pages impressed installation of new image drum units.Pages - Magenta (images) with imagePages - Cyan drumsNote! Because of the EEPROM exchange (engine control circuit board), the life information ofbelt and ID, etc. has been cleared. Please notice that there may appear some errors inthe life management until the following unit exchange is done.