Oki C3520 Network Manual

Also see for C3520: User guide

Oki C3520 Network Manual Manual pdf 22 page image

Windows> 22Standard TCP/IP Port using LPR or Port 9100NOTE:In order to use Microsoft LPR, it must first be installed on yoursystem.To install this port, proceed as follows:1. Select Start -> Settings -> Control Panel.2. Open the “Printers” folder.3. Double-click Add Printer and then select Next.4. Select Local Printer, clear the “Automatically detect myprinter” check box. Click Next.5. Select “Create a new port” and, under “Type of Port:”,select “Standard TCP/IP Port”.6. Click Next.7. The “Add Standard TCP/IP Printer Port Wizard” isdisplayed. Click Next.8. Click Next.9. Under “Name or address of server providing LPD”, enterthe host name or IP address of your printer, for example,‘192.168.1.31’. If the above IP address is entered, thePort Name will default to IP_192.168.1.31.10. Click Next. A message is displayed indicating thatadditional port information will be required.11. Under “Device Type”, select Custom and click Settings.12. Depending on whether you are installing the WindowsStandard TCP/IP Port using LPR or Port 9100, enter thefollowing details:LPR> Ensure “Protocol” is set to LPR.> Under “Name of printer or print queue on that server”type ‘lp’.Port 9100:> Ensure “Protocol” is set to Raw.