Oki C3530nMFP Handy Reference

Also see for C3530 MFP: Installation Network user's guide Network guide User guide Setup guide

Contents

Oki C3530nMFP Handy Reference Manual pdf 9 page image

8 ï EnglishWalk-Up OperationCopy / Scan / Fax (cont.)Scan to Network PCScan the document and send thescanned image to a PC which is onthe network with your system. ThePC and its IP address must beprogrammed into the MFP systemby your system administrator.1. Load the document (see p. 4).2. If prompted [Enter PIN], key inyour PIN and press the Enterkey ( ).3. Press the Down arrow key tohighlight [Scan].4. Press the Enter key.5. Press the Down arrow key tohighlight [Network PC].6. Press the Enter key twice.7. Select the pre-programmedprofile for the PC and press theEnter key.8. Press the Start Color or StartMono key.NoteSee the on-line Userís Guide onthe CD supplied with yoursystem or check with yoursystem administrator for moreinformation.Scan to PC (PushMode)Use the systemís control panel toscan a document, then push thescanned image to your local PC.NoteYou can also use the HotKeyutility to scan and pull adocument in from the C3530MFP system to your PC (see theon-line Userís Guide on the CDincluded with the system orcheck with your systemadministrator).1. Load the document (see p. 4).1. If prompted [Enter PIN], key inyour PIN number and press theEnter key ( ).2. Press the Down arrow key tohighlight [Scan].3. Press the Enter key.4. Press the Down arrow key tohighlight [PC].5. Press the Enter key.6. Selectï [Email] ó scan to email andsave the file.ï [Folder] ó scan and save to afolder on the PC.ï [Application] ó scan to aselected application.ï [Fax] ó scan and send a faxto the PC containing thescanned image.7. Press the Start Color or StartMono key.